parallax background
e2-updates

Z CAM E2 Firmware Updates

Firmware Upgrade using Z CAM web client:

  1. Connect Z CAM E2 to the computer through an Ethernet cable.
  2. Menu -> Connect -> Network -> ETH. Mode -> Direct
  3. Read the ETH. IP 10.98.32.1 (normally).
  4. Open your browser on computer and enter: http://10.98.32.1/www/html/controller.html
  5. Z CAM web client screen would show up.
  6. Go to Upgrade, select the firmware file and follow the step to complete.

* MAKE SURE THAT CAMERA IS CONNECTED TO A STABLE POWER SOURCE.
** MAKE SURE THAT FIRMWARE FILE IS NOT UNZIPPED BY THE BROWSER (SAFARI IS NOT RECOMMENDED) DURING THE DOWNLOAD PROCESS.

Z CAM E2

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes

Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release

Firmware 1.0.7
Download

Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-M4

Firmware 1.0.11
Download
October 20

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes
Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release
Firmware 1.0.7
Download
Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-M4 Mark II

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes
Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
    • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode) Added: Gamma/Matrix/Color Correction settings. Added: Scope / Zebra / False Color in web client. Improved: Gallery user interface optimized in web client. Changed: Multicam Synchronisation naming: Main/Subordinate Changed: IP Access Management｜Allow List / Deny List
Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2C

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes
Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release
Firmware 1.0.6
Download

Release note for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2G

Firmware 0.98.0
Download

Release note for firmware 0.98.0

  • All resolution and frame rate combinations now support ProRes 422 recording (except C8K 2.4:1).
  • ProRes proxy records in separate files.
  • Preview & in camera playback with 3D LUT banding issue fixed.
  • External SSD recording through USB performance improved.
  • Added 5K 60fps recording on E2-F6.
  • UVC (USB camera) bug fixes.
  • Other bug fixes.

Z CAM E2N

Firmware 1.0.0 (Updated)
Download
November 7, 2025

Release notes for firmware 1.0.0 (Updated)

  • Added Color Bar
  • Added metering window
  • Added auto iris
  • Added shutter speed up to 1/10000 sec
  • Added RGB adjustment in Black Level (except Vivid profile)
  • Added CCT & RGB offset in White Balance
  • Optimized video & audio sync
  • Other bug fixes
Firmware 1.0.0
Download
August 26, 2025

Release notes for firmware 1.0.0

  • Added: Scope / Zebra / False Color in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Optimized FreeD performance
  • Other bug fixes
Firmware 0.9.17
Download

Release notes for firmware 0.9.17

  • Added IP Access Management (web client)
  • Added GOP size in Streaming setting (web client)
  • Added RTMP SRT auto start on/off in Streaming setting (web client)
  • Added Assisted Tools (web client)
  • Optimized Auto Framing feature (applicable to P2-R1 & P2-R1N only)
  • Other bug fixes
Firmware 0.9.15
Download

Z CAM E2-S6

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes

Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release

Firmware 1.0.7
Download
Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-S6 Mark II

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes
Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
    • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode) Added: Gamma/Matrix/Color Correction settings. Added: Scope / Zebra / False Color in web client. Improved: Gallery user interface optimized in web client. Changed: Multicam Synchronisation naming: Main/Subordinate Changed: IP Access Management｜Allow List / Deny List
Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-S6G

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes

Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release

Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-F6

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes

Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release

Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-F6 Mark II

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes
Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
    • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode) Added: Gamma/Matrix/Color Correction settings. Added: Scope / Zebra / False Color in web client. Improved: Gallery user interface optimized in web client. Changed: Multicam Synchronisation naming: Main/Subordinate Changed: IP Access Management｜Allow List / Deny List
Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes

Z CAM E2-F6 Pro

Firmware 0.9.9
Download

Release notes:

  • Added RAW over HDMI (ProRes RAW recording on Atomos Ninja V)
  • Added 4K 4:3 4096x3072 50fps max
  • Optimized Timecode
  • Other bug fixes

Z CAM E2-F8

Firmware 1.0.11
Download
October 20, 2025

Release notes for firmware 1.0.11

  • Added shutter speed up to 1/10000
  • Optimized frame rate accuracy
  • Optimized SDI output
  • Other minor bug fixes

Firmware 1.0.10
Download
August 8, 2025

Release notes for firmware 1.0.10

  • Added: Z CAM EzPlay support
  • Added: Video Flip when using H.265/H.264 (not supported in ProRes mode)
  • Added: Gamma/Matrix/Color Correction settings.
  • Added: Scope / Zebra / False Color in web client.
  • Improved: Gallery user interface optimized in web client.
  • Changed: Multicam Synchronisation naming: Main/Subordinate
  • Changed: IP Access Management｜Allow List / Deny List
  • Fixed: System auto restart bug in 1.0.8 release

Firmware 1.0.6
Download

Release notes for firmware 1.0.6

  • Added Z CAM EzLink trigger option
  • Updated user interface of the web client
  • Other bug fixes