Firmware Updates
Firmware Upgrade using Z CAM web client:
* MAKE SURE THAT CAMERA IS CONNECTED TO A STABLE POWER SOURCE.
** MAKE SURE THAT FIRMWARE FILE IS NOT UNZIPPED BY THE BROWSER (SAFARI IS NOT RECOMMENDED) DURING THE DOWNLOAD PROCESS.
- Connect Z CAM E2 to the computer through an Ethernet cable.
- Menu -> Connect -> Network -> ETH. Mode -> Direct
- Read the ETH. IP 10.98.32.1 (normally).
- Open your browser on computer and enter: http://10.98.32.1/www/html/controller.html
- Z CAM web client screen would show up.
- Go to Upgrade, select the firmware file and follow the step to complete.
* MAKE SURE THAT CAMERA IS CONNECTED TO A STABLE POWER SOURCE.
** MAKE SURE THAT FIRMWARE FILE IS NOT UNZIPPED BY THE BROWSER (SAFARI IS NOT RECOMMENDED) DURING THE DOWNLOAD PROCESS.
Z CAM E2 Firmware
See Latest Updates
Z CAM E1 Firmware
Download Firmware 0.31
Download Firmware 0.30
Download Firmware 0.28
Z CAM P2-R1 / P2-R1N
Download 18x zoom Firmware 1.0.1 | Nov. 3, 2025 | Release Notes
Release notes
• Added metering window
• Added auto iris
• Added shutter speed up to 1/10000 sec
• Added RGB adjustment in Black Level (except Vivid profile)
• Added CCT & RGB offset in White Balance
• Optimized video & audio sync
• Optimized Auto Framing
• Other bug fixes
• Added metering window
• Added auto iris
• Added shutter speed up to 1/10000 sec
• Added RGB adjustment in Black Level (except Vivid profile)
• Added CCT & RGB offset in White Balance
• Optimized video & audio sync
• Optimized Auto Framing
• Other bug fixes
Release notes
• Added metering window
• Added auto iris
• Added shutter speed up to 1/10000 sec
• Added RGB adjustment in Black Level (except Vivid profile)
• Added CCT & RGB offset in White Balance
• Optimized video & audio sync
• Optimized Auto Framing
• Other bug fixes
• Added metering window
• Added auto iris
• Added shutter speed up to 1/10000 sec
• Added RGB adjustment in Black Level (except Vivid profile)
• Added CCT & RGB offset in White Balance
• Optimized video & audio sync
• Optimized Auto Framing
• Other bug fixes
Download 18x zoom Firmware 1.0.0 | Aug. 26, 2025 | Release Notes
Release notes
• Added: Scope / Zebra / False Color in web client.
• Changed: Multicam Synchronisation naming: Main/Subordinate
• Changed: IP Access Management｜Allow List / Deny List
• Other bug fixes
• Added: Scope / Zebra / False Color in web client.
• Changed: Multicam Synchronisation naming: Main/Subordinate
• Changed: IP Access Management｜Allow List / Deny List
• Other bug fixes
Release notes
• Added: Scope / Zebra / False Color in web client.
• Changed: Multicam Synchronisation naming: Main/Subordinate
• Changed: IP Access Management｜Allow List / Deny List
• Other bug fixes
• Added: Scope / Zebra / False Color in web client.
• Changed: Multicam Synchronisation naming: Main/Subordinate
• Changed: IP Access Management｜Allow List / Deny List
• Other bug fixes
Download Firmware 0.9.17 Release Notes
Release notes
• Added IP Access Management (web client)
• Added GOP size in Streaming setting (web client)
• Added RTMP SRT auto start on/off in Streaming setting (web client)
• Added Assisted Tools (web client)
• Optimized Auto Framing feature
• Other bug fixes
• Added IP Access Management (web client)
• Added GOP size in Streaming setting (web client)
• Added RTMP SRT auto start on/off in Streaming setting (web client)
• Added Assisted Tools (web client)
• Optimized Auto Framing feature
• Other bug fixes
Download Firmware 0.9.12
Z CAM IPMAN S Firmware
FIRMWARE UPGRADE PROCESS:
- Copy the firmware file "WLM_FW_1.0.2.fw" to the root directory of an USB drive (with USB-C connector).
- Connect the USB drive to the USB-C port of Z CAM IPMAN S (power off status).
- Select Power on and press centre "Connect" key and right "Arrow" key all at the same time. Release all keys once "Update" is shown on the display.
- Upgrade process should be completed in approximately one minute.
Z CAM IPMAN S 1.0.2 - Release notes
• HDMI output frame rate decimal place bug fixed.
• Retain settings after power off and no re-scan upon power on.
• HDMI output frame rate decimal place bug fixed.
• Retain settings after power off and no re-scan upon power on.
Z CAM K1 Pro Firmware
Download Firmware 0.55
Download Firmware 0.51
